Pacific Cool Tool SL-Metal Cutting Oil-Water Soluble
INTRODUCTION
This oil is soluble type high quality metal cutting oil which yields rich milky emulsion with water, Special additive is mixed to ensure its complete dispersion in water. The emulsion formed is homogeneous and stable in nature and does not split during use or routine machine shut down periods under normal conditions. This oil contains rust inhibitors, which impart anti-rust and anti-corrosive properties to the emulsion. Specially selected biocide is mixed to prevent bacterial growth in the emulsion.
APPLICATION:
This oil is recommended for different kind of ferrous and non- ferrous metal cutting. It is specially suitable for metal cuttings where the cooling properties are more desirable than lubricating functions. To obtain stable emulsion oil should be mixed with water and not to water with oil. The ratio of oil and water is normally 1:20. For grinding purpose the ratio of oil may be a bit higher.
PACKING:
210 Ltr, 50 Ltr & 20 Ltr
Has superior cooling and lubricating properties which contribute towards clean work, excellent surface finish and minimum tool wear.
When used as a grinding coolant, contribute towards long grinding wheel life and minimize wheel loading
Providing long lasting stable emulsion
Protects work-piece, machine components and tool materials from rust and corrosion
Enables to obtain superior finish and accurate tolerances to the part machined
Kinetic viscosity, cSt @40 °C | 20 |
Flash Point COC, °C min. | 150 |
Copper Strip Corrosion @ 100 °C | 1 |
Cast Iron Corrosion test, 0/1-1 | Pass |
- IS: 1115-1986 (revised 1996)